SPAN Smart Panel Installation in the Bay Area
SPAN-certified installer, based in Los Gatos: a SPAN Panel replaces your main panel with 32 app-controlled circuits and PowerUp load management, so a 100A or 125A home can add an EV charger, heat pump or battery without a service upgrade.
Licensed C-10 electrical contractor, CA #1143455, serving Santa Clara County, the Peninsula, San Francisco and Oakland with our own crew. Get a Fixed-Price SPAN Quote
Last updated: November 2026 · Sources: SPAN Panel MAIN 32 specifications, SPAN on service-upgrade avoidance, SPAN UL 3141 certification (Oct 2025), SPAN Drive specifications
Often paired with: Panel upgrades · Battery storage · EV charger installation · Free NEC load calculator · Pricing
Further reading: Can your panel handle a heat pump, induction and an EV? · Electrical permits in Santa Clara County · Powerwall 3 vs FranklinWH vs Enphase
What a SPAN Panel is
A SPAN Panel is a main electrical panel with a computer in it. The current model, the SPAN Panel MAIN 32, has 32 individually monitored and controllable circuit spaces, a 100–200A main breaker, a 225A bus bar, feed-through lugs for a sub-panel, revenue-accurate metering on every circuit, and a NEMA 3R enclosure that can go indoors or outdoors where most Bay Area panels live. It takes ordinary Square D HOM, Eaton/Bryant BR and Siemens/Murray QP branch breakers, so there is no proprietary breaker to buy.
Three things separate it from the grey box on your wall now:
- Per-circuit monitoring. The SPAN Home app shows what every circuit is drawing right now and over time, so “why is the bill high?” becomes a chart instead of a guess.
- Per-circuit control and scheduling. Any circuit can be switched off, back on, or put on a schedule from your phone: a hot tub on a time-of-use window, a dryer that waits for off-peak, a detached-garage feed you shut down while travelling.
- PowerUp load management. SPAN’s pre-installed energy management software, which is the reason most Bay Area homeowners call us about SPAN and the subject of the next section.
SPAN also makes a MAIN 16, a MAIN 40 and main-lug-only MLO 24 and MLO 48 versions for sub-panel and larger-service layouts. The MAIN 32 is the one that pairs with the widest set of batteries (details below), and it is the version we fit on most single-family homes.
Add an EV charger or heat pump on a 100A or 125A service
This is the Bay Area use case. A 1950s Willow Glen or Rose Garden ranch, a pre-war Palo Alto or Mountain View bungalow, a Sunset or Richmond District row house in San Francisco, and a Rockridge or Temescal craftsman in Oakland very often still sit on 100A or 125A service. Add a Level 2 EV charger and a heat pump and the NEC Article 220 load calculation comes back over the line, and the conventional answer is a 200A service upgrade, which in some neighborhoods also means a new PG&E service drop or underground pull.
PowerUp changes the arithmetic. It senses current at the main breaker and, when the house gets close to its service limit, throttles or pauses the large loads you have told it to manage, typically the EV charger first, so the total draw stays within the continuous-load limit of the existing service. The 2023 NEC, which California adopted as the 2025 Electrical Code, allows a listed energy management system to set the maximum load on a service and feeder, and SPAN Panels earned the UL 3141 Power Control System listing in October 2025, the standard the 2026 NEC will require for PCS applications.
What we do before promising it works:
- Run the Article 220 calculation for the house as it is and as you plan it (start with our free load calculator if you like; we will check it on site).
- Model the project in SPAN’s PowerUp project planner to confirm the managed loads keep the service within code.
- Confirm with your city’s building department that the submittal is accepted as a load-management design under the adopted code. PowerUp has to be configured and enabled by a SPAN-authorized installer at commissioning, and the permit is the city’s call, so we settle this before you sign, not at inspection.
If the numbers do not work even with PowerUp, we say so and quote the 200A upgrade instead.
Battery backup with circuit-level control during PSPS shutoffs
A conventional battery install splits the house once, on install day: a backup sub-panel with the circuits you chose then, and everything else dark during an outage. With a SPAN Panel every circuit is on the backup side and you decide, from the app, which ones the battery feeds right now. Day one of a multi-day PSPS shutoff in the Los Gatos hills you might carry the refrigerator, internet, well pump and a few lights; day three, when the forecast says the lines stay off, you drop the water heater and run the furnace fan only in the evening. SPAN says this kind of load prioritisation extended backup time by about 40% in its own simulated-outage study; your result depends on what you switch off. The panel also provides backup overload protection so a battery is not tripped by a load it cannot carry.
Verified pairings for the SPAN Panel MAIN 32:
- Tesla Powerwall 3 (also Powerwall 2 and Powerwall+) with the Backup Switch, Backup Gateway 2 or Backup Gateway 3; SPAN requires a wired network connection to the lead Powerwall. We are a Tesla Certified Installer.
- FranklinWH aPower and aPower 2 with the aGate controller, the pairing we recommend when a standby generator is part of the plan.
- Enphase IQ Battery 5P with the IQ System Controller 3, and the IQ 3, 3T, 10 and 10T with Controller 1 or 2. Enphase pairing needs SPAN’s Remote Meter Kit and is MAIN 32 only.
Sizing, round-trip performance and the three batteries side by side are on our battery storage page and in this comparison.
SPAN Drive EV charger
SPAN’s own Level 2 charger, the SPAN Drive, delivers up to 48A / 11.52 kW, is configurable from 6A to 48A, uses a 20 ft J1772 cord, and talks to the panel over a dedicated RS485 link so PowerUp can adjust charging in real time against everything else in the house. It is sold only as an accessory to a SPAN Panel, not as a standalone charger. You do not have to use it: SPAN lists Level 1 and Level 2 chargers with NACS and J1772 connectors as compatible, so a Tesla Wall Connector or another hardwired charger on a PowerUp-managed circuit works too. See EV charger installation for circuit sizing and permits.
Permits, PG&E and timeline
A SPAN Panel is a main panel replacement, so it is permitted and inspected like one everywhere we work: a building or electrical permit, a load calculation with the application, and a final inspection. PG&E has to pull the meter and disconnect the service for the swap and reconnect it afterwards, and that scheduling, not the electrical work, sets the pace. Typical end to end is 2–6 weeks; the swap itself is one day on site, with power back the same evening and the SPAN app, PowerUp settings and any battery or charger pairing commissioned before we leave. The SPAN Panel does not contain a meter socket, so a home with a combined meter-main keeps or replaces that enclosure and the SPAN Panel sits beside it as the house panel; an existing feed-through to a sub-panel is carried over on the SPAN’s feed-through lugs. We handle the plan set, the permit, the PG&E request and the inspection, and we walk the city’s requirements in this permit guide.
When SPAN is worth it, and when it is not
| Your situation | Our usual recommendation |
|---|---|
| 100A or 125A service, adding an EV charger and a heat pump, induction range or ADU loads | SPAN with PowerUp, if the load calculation and the city accept it; otherwise a 200A upgrade |
| Installing or already own a Powerwall 3, FranklinWH or Enphase battery and want to choose backup circuits during an outage | SPAN, as the backup panel in place of a fixed essential-loads sub-panel |
| Electrifying in stages over several years and want circuit-level data before each step | SPAN, sized once, with loads added under PowerUp as they come |
| Adding only an EV charger on a tight 100A service | A charger with built-in load management or a dedicated EVEMS first; SPAN if other loads are coming |
| Zinsco or Federal Pacific panel, no battery or EV plans | A conventional panel replacement; SPAN adds cost you will not use |
| Just need a straightforward 200A upgrade for a remodel | A conventional 200A upgrade |
What it costs
We do not publish a flat SPAN price, because the quote moves with your service entrance, how many circuits are moved or rewired, whether a battery or charger is installed in the same visit, and the city’s permit fee. Every SPAN project is quoted as a fixed, itemized price after a site visit, under the same no-surprises guarantee as the rest of our work. For the alternatives and companions, our published pricing lists a conventional 200A panel upgrade at $4,500–$14,000, a permitted 60A Level 2 EV charger circuit at $2,200–$3,100 (10–100 ft, charger unit excluded), and a battery at $9,000–$20,000 installed per unit. When SPAN avoids a service upgrade, those are the figures it is competing with.
Get a Fixed-Price SPAN Panel Quote
SPAN-certified, Tesla Certified and Enphase installer. One site visit, one itemized price, permit and PG&E handled.
CA Lic #1143455 · Tesla Certified Installer · Enphase · Bonded & Insured
✓ 10-year workmanship warranty · ✓ Our own licensed C-10 crew — no subcontractors · ✓ Upfront, no-pressure pricing
Get a Free Quote ☎ (650) 451-8464Where we install SPAN Panels
From our Los Gatos office we cover Santa Clara County (San Jose, Los Gatos, Saratoga, Campbell, Cupertino, Santa Clara, Sunnyvale, Mountain View), the Peninsula (Palo Alto and neighbors), San Francisco and Oakland. San Francisco and Oakland projects are scheduled installations, not same-day calls. Check your address on the service-area page.
Our Guarantees
✓ Upfront, No-Surprises Pricing
The price we quote is the price for the agreed scope. If the scope or equipment changes, we agree any adjustment in writing first — never a surprise.
✓ On-Time Guarantee
We show up when we say we will, and keep you posted if anything changes.
✓ Satisfaction Guarantee
We're not finished until you're satisfied with the work.
✓ 10-Year Workmanship Warranty
Our installation labor is guaranteed for 10 years — on top of 25-year equipment warranties.
✓ Price-Match Promise: bring us a written quote from another licensed contractor and we'll beat it by at least 5%.
FAQs — SPAN Smart Panels in the Bay Area
How much does a SPAN smart panel installation cost in the Bay Area?
We quote every SPAN project as a fixed price after a site visit, because the total depends on your service entrance, how many circuits move, whether a battery or EV charger goes in at the same time, and the city's permit fee. For comparison, a conventional 200A panel upgrade runs $4,500 to $14,000 on our published pricing page. A SPAN quote is itemized the same way and does not change after you sign.
Can a SPAN Panel let me add an EV charger without upgrading to 200A?
Often, yes. SPAN's PowerUp energy management software, pre-installed on every SPAN Panel, watches the current at the main breaker and throttles the circuits you choose, such as the EV charger, so the home stays under its service limit. The 2023 NEC (California's 2025 Electrical Code) recognizes a listed energy management system setting the maximum load on a service, and SPAN Panels carry the UL 3141 power control system listing. We confirm the fit with an NEC 220 load calculation and SPAN's project planner before quoting.
Do I need a permit to install a SPAN Panel?
Yes. A SPAN Panel replaces your main electrical panel, and every city and county we work in requires a building or electrical permit, a load calculation with the application, and a final inspection for a main panel replacement. PG&E must also disconnect and reconnect the service for the swap. We prepare the plan set and load calc, pull the permit, schedule PG&E, and meet the inspector as part of every SPAN job.
Does SPAN work with the Tesla Powerwall 3?
Yes. SPAN lists the Powerwall 3, Powerwall 2 and Powerwall+ as compatible, with the Tesla Backup Switch, Backup Gateway 2 or Backup Gateway 3, and the panel needs a wired network connection to the lead battery. With the pairing in place you choose, from the SPAN app, which circuits the Powerwall carries during a shutoff and can change that list mid-outage instead of living with the essential-loads sub-panel chosen on install day.
Does SPAN work with FranklinWH and Enphase batteries?
Yes, with model limits. SPAN lists the FranklinWH aPower and aPower 2 with the aGate controller, and on the SPAN Panel MAIN 32 the Enphase IQ Battery 5P with the IQ System Controller 3 (plus the IQ 3, 3T, 10 and 10T with Controller 1 or 2). Enphase pairing requires SPAN's Remote Meter Kit, and SPAN states its MAIN 16, MLO 24, MAIN 40 and MLO 48 panels are not compatible with Enphase batteries, which is why the MAIN 32 is our default for Enphase homes.
How many circuits does a SPAN Panel have?
The current SPAN Panel MAIN 32 has 32 individually monitored and controllable circuit spaces, a 100 to 200A main breaker, a 225A bus bar, feed-through lugs and a 90A maximum branch breaker. SPAN also sells MAIN 16, MAIN 40, MLO 24 and MLO 48 versions for smaller homes, sub-panel use and larger services; a MAIN 32 can only be ganged with other MAIN 32s. Most Bay Area single-family homes fit comfortably in 32 spaces.
Can I keep my existing circuit breakers?
Usually. The SPAN Panel MAIN 32 accepts standard Square D HOM, Eaton/Bryant BR and Siemens/Murray QP branch breakers, including tandem and quad breakers and AFCI/GFCI types with a pigtail neutral. If your current panel uses one of those families and the breakers are in good condition, many can move across; a Zinsco, Federal Pacific or other obsolete panel gets all-new breakers, which we include in the quote.
How long does a SPAN panel installation take?
Plan on two to six weeks from signed quote to passed inspection in most Bay Area cities. Plan check takes a few days to a few weeks depending on the city, PG&E's disconnect and reconnect window is the usual swing factor, and the swap itself is one day on site with power back on the same evening. Commissioning the SPAN app, PowerUp settings and any battery or charger pairing happens that same day.
Is a SPAN Panel worth it if I have no battery or EV plans?
Usually not. If your home simply needs a sound 200A panel and you have no near-term plans for an EV charger, heat pump, induction range or battery, a conventional upgrade does the job for less. SPAN earns its cost when it avoids a service upgrade on a 100A or 125A home, when it gives a battery circuit-level backup control, or when you are electrifying in stages and want to see every circuit's usage. We quote both paths side by side.
Is there a rebate or tax credit for a SPAN panel in 2026?
No federal credit applies to a homeowner's smart panel in 2026: the residential 30% clean-energy credit ended for systems placed in service after December 31, 2025, and SGIP residential battery budgets have been closed or waitlisted since September 2026. Commercial and non-profit owners may still qualify for the business investment credit. Check our incentives hub for current CCA and utility offers before you buy, and confirm details with your tax advisor.
Request Your Free Quote
Licensed, bonded & insured Bay Area electricians. Upfront pricing and same-day estimates available.
CA Lic #1143455 · Tesla Certified Installer · Enphase · Bonded & Insured
✓ 10-year workmanship warranty · ✓ Our own licensed C-10 crew — no subcontractors · ✓ Upfront, no-pressure pricing
Get a Free Quote ☎ (650) 451-8464